◎欢迎参与讨论，请在这里发表您的看法、交流您的观点。
Product Introduction
NB condenser water pump is mainly used for transferring condensate water from the condensate in power station, also can be used for transferring other liquid which is physically and chemically similar to water. This pump has high suction performance. The temperature of the liquid should below 80 degrees centigrade, inlet pressure is not more than 0.6MPa. Material of main parts: medium contacting parts like pump casing, cover, seal ring and shaft sleeve: cart iron; impeller of NB series pump: silicon-brass; shaft: high quality carbon steel.
Main Benifits
• High efficiency & Low consumption
• High temperature liquid transmission
• Easy installation & maintenance
• Single stage single suction cantilever
Main Applications
N condensate water pump for power station is a specific type of pump used to pump the condensate (water) produced in an HVAC (heating or cooling), refrigeration, condensing boiler furnace or steam system. They may be used to pump the condensate produced from latent water vapor in any of the following gas mixtures:
• Conditioned (cooled or heated) building airTechnical Data
| Product Name | NB condenser water pump |
| Structure | Single stage |
| Material | Cast iron |
| Head | 37.7-143m / 122-469ft |
| Flow | 8-120m3/h / 35.2-528USgpm |
| Temperature | 0~120℃ / 0-248℉ |
| Speed | 2950 r/min & 2980 r/min |
| Power | 5.5~75kw |
| Efficiency | 41%-68% |
| NPSH | 2-5.5m |
| Liquid Medium | Condensate water |
| Standard | ISO9001 |
Structure Chart
Model Description
100NB-45
45 ----------------- Delivery head 45 m
NB ---------------- Condensate pump
100 --------------- Inlet diameter 100 mm
◎欢迎参与讨论，请在这里发表您的看法、交流您的观点。
