The S-type single-stage double-suction split case pump is horizontally installed. The suction port and the discharge port are both below the center line of the pump shaft, and the pump body is opened horizontally. It is not necessary to disassemble the inlet and outlet pipes during maintenance. The shaft seal is a soft packing seal; it can also be changed to a mechanical seal.
The S-type single-stage double-open pump is suitable for industrial and urban water supply and drainage pumps. It can be used as a drainage or water supply pump for factories, cities, power stations, water conservancy projects, and also for farmland irrigation. The “S” series pump is an energy-efficient product with simple structure and excellent performance. For conveying clean water without solid particles or other liquids with physical and chemical properties similar to water, the temperature of the medium to be transported is 0 ° C ~ 80 ° C, and the inlet pressure is allowed to be 0.6 MPa.
S-type single-stage double suction pumping parameter range:
Flow rate Q 88~1400m3/h
Head H 12~100m
S type single stage double suction pump model description:
200S95
200-discharge exit path
S-single stage double suction horizontal open centrifugal pump
95-lift
S-type single-stage double suction open pump rotation direction:
From the motor end to the pump, the "S" series pump rotates counterclockwise. At this time, the suction port is on the left, the discharge port is on the right, and the pump rotates clockwise. At this time, the suction port is on the right and the discharge port is on the left.
S-type single-stage double-suction medium-opening pump main parts material:
The pump's overcurrent components are made of cast iron.
S-type single-stage double suction open pump complete range:
Complete supply pump, motor, bottom plate, coupling, short pipe for import and export, etc.
