Home > Products > Circulation Pump > > IS End Suction Circulating Water Pump
IS End Suction Circulating Water Pump

IS End Suction Circulating Water Pump

Capacity: 5.4-400 (m³/h) 

Head: 4-125 (m)

Temperature: 0-80 (℃)

Product Introduction

IS end suction centrifugal circulating water pump is single-stage single-suction centrifugal water pump, applied for industrial and urban water supply and drainage and agricultural irrigation. It is used for conveying water or physical and chemical properties similar to water. The medium temperature is not higher than 80 degrees centigrade, the inlet pressure is 0.6 MPa.

Main Benifits

Compact structure:
1. The pump body and its cover are separated by the back of the impeller
2. O type seal ring between shaft and shaft sleeve

 • High efficiency
 • Safe and reliable
 • Easy maintanence
 • Long service life
Energy conservation

Main Applications

 • Clean out system.
 • Food machining and medicine produce
 • Environment protecting system.
 • Waste water treatment for paper making, metallurgy, galvanization, smelting, dye.
 • Electroplate and Dyeing system.
 • Industrial and chemical sump treatment
 • Explosion proof motor for oil, alcohol and other explosive liquid

Technical Data

Product Name IS end suction circulating water pump
Structure Single stage
Material Cast iron
Head 4-125 m / 13-410ft
Flow 5.4-400 m3/h / 23.8-1760USgpm
Temperature 0~80℃ / 0~176℉
Speed 980r/min 1480r/min 2980 r/min
Power 0.55-160 kw
Efficiency 32%-85%
NPSH 2-5.5 m
Liquid Medium Non-corrosive oils without solid particles
Standard ISO9001

Structure Chart


Model Description

IS ----------- Single stage single suction centrifugal water pump
50 ---------- Inlet diameter 50 mm
32 ---------- Outlet diameter 32 mm
125 -------- Diameter of the impeller 125 mm
A ----------- A,B,C refer to the first, the second, the third trim after the impeller respectively